Your LHA / LNK Series DVR / NVR can receive firmware updates:
- Automatically over a network connected by an Ethernet cable (included).
- Manually by connecting a USB flash drive (not included) to your DVR / NVR. Click here for more information about manually upgrading firmware through your DVR / NVR.
- Manually by connecting a USB flash drive (not included) to your PC / Mac and using the FLIR Client 12 software. Click here for information on how to manually upgrade firmware using FLIR Client 12 software.
IMPORTANT: It is recommended to use automatic upgrade unless directed by technical support to perform a manual upgrade. Technical support will provide you with a .bin file for manual firmware upgrade. Do not power off the DVR / NVR during a firmware upgrade.
Prerequisites:
- Ensure your DVR / NVR system is connected to a network using the included Ethernet cable.
To automatically upgrade the DVR / NVR firmware:
In the taskbar, click the Main Menu icon (
), and then click Advanced > Auto Upgrade.
In the Auto Upgrade tab, click Check Fw to search for new firmware.
- If new firmware is available,? a prompt notifies you to upgrade the firmware. Click OK.
- Allow 5-10 minutes for the system to upgrade. The DVR / NVR will automatically restart when the firmware upgrade is complete.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article