Follow the steps below to connect your thermal monocular camera to the Thermal Connection app.
Note: The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows: Wi-Fi 2.4 GHz (2.4 GHz to 2.4835 GHz) 20 dBm.
Step 1 - Download the App
Download your camera's mobile app, Thermal Connection.
Step 2 - Enable Your Camera's Wi-Fi Hotspot
Looking into your camera:
* Press and hold 
to open the menu.
* Press 
or 
to navigate to WiFi.
* Press to open the setting.
* Press to select AP (Access Point).
* Press to confirm your setting.
* Press 
the exit the menu.
Step 3 - Connect to the App
- Open the app.
- Tap Switch WIFI.
- Tap on your Wi-Fi settings, and then tap your camera's name.
- Wi-Fi Name: Your camera's Serial Number (S/N)
- Wi-Fi Password: The last 8digits of your camera's Serial Number (S/N)
- Tap Connect WIFI.
- Enter your camera's Wi-Fi password, and then tap Next.
You will now be able to view your camera from the app and make some minor setting adjustments. See the article Using the App for more details.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article
