LHB Series: DVR keeps beeping

Modified on Thu, Feb 20 at 6:15 AM

Your LHB Series DVR can be configured to emit warnings or alerts when events occur such as video loss, hard disk drive (HDD) errors, or when the HDD is full. If the DVR is beeping, investigate the cause of the alert, and disable or configure the system warnings for future.

The following instructions require you to access your system using your DVR and a monitor.

To configure system warnings:

  1. In the taskbar, click the Main Menu icon (home icon), and then click Advanced > Warning.

    LHB warning configuration

  2. In the Warning Type drop-down, select the system warning you would like to configure.

  3. Check boxes next to features you would like to activate when the selected event occurs.

    REMINDER: Enabling Send Email requires you to set up email notifications.
    Enabling email alerts using the Lorex by FLIR email server
    Enabling email alerts using your own server information

  4. In the Buzzer drop-down, select ON for the DVR to make an alarm sound when the warning is triggered, or select OFF for the DVR to remain silent.

  5. Click Save to save your settings.
  6. Click OK.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article

Search for more topics

Still have questions?

If you still have questions or couldn’t find what you’re looking for, our support team is here to help—feel free to reach out for further assistance.

Contact Us