Different monitors can support different image / video resolutions. If your image appears pixelated or cut off, you may need to modify your LHA / LNK Series DVR / NVR display resolution.
REMINDER: The maximum supported output resolutions for LHA / LNK Series are:
- Up to 1080p resolution using a VGA Cable (not included)?.
- Up to 4K resolution using the included High Definition Multimedia Interface (HDMI) cable (4K monitor or TV required 8/16-channel recorders only. 4-channel recorders support a maximum of 1080p output resolution)?.
The following instructions require you to access your system using your DVR / NVR and a monitor.
To change display resolution:
- In the taskbar, click the Main Menu icon (
), and then click Settings > Display > Video Out. In the VGA/HDMI Resolution drop-down, select the resolution of your monitor or TV.
TIP: If the DVR / NVR display is cropped,? check the Support Overscan checkbox to optimize your display. This is usually seen in older Cathode Ray Tube (CRT)? monitors.
Click Save to save the settings.
- Click OK.
If you are experiencing difficulties with your display, you may want to restore default settings.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article
