You can quickly take snapshots from enabled channels using the Manual Capture feature in the LHA / LNK Series DVR / NVR. Manual Capture by default, is disabled.
The following instructions require you to access your system using your DVR / NVR and a monitor.
To enable and configure Manual Capture:
In the taskbar, click the Main Menu icon (
), and then click Settings > Picture > Picture. 
In the Channel drop-down, select a channel.
- In the Manual Capture drop-down, select Enable.
- Click Save to enable changes.
- Click OK.
To manually capture a snapshot:
Click the Manual Capture icon (
) on the Mini Menu above a camera's live display.
You can also set your DVR / NVR system to automatically capture snapshots
Once you have captured a snapshot, you can locate and view them on your DVR / NVR.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article
