The LHA / LNK Series DVR / NVR systems have many different recording settings that can be configured. Basic configuration options include recording for specific channels, selecting a stream mode, and enabling pre-recording.
Prerequisite: * The following instructions require you to access your system using your DVR / NVR and a monitor.
To configure recording parameters:
In the taskbar, click the Main Menu icon (
), and then click Settings > Record > Record. 
In the Channel drop-down, select a channel to set the recording parameters.
- In the Record drop-down, select Enable to enable recording on the selected channel.
- In the Stream Mode drop-down, select the recording mode:
- Select MainStream to use mainstream recording only. Click here for instructions on how to configure mainstream settings.
- Select DualStream to record using mainstream recording settings while using the substream for remote viewing. Click here for instructions on how to configure substream settings.
IMPORTANT: You must set the Stream Mode to DualStream to play back recordings using the FLIR Secure app. Live viewing will not be affected.
- In the Pre Record drop-down, select Enable to enable pre-recording for motion events. Click here for instructions on how to set up motion detection preferences.
- Click Save to set recording parameters.
- Click OK.
Configuring recording resolution using the FLIR Client 12 software for PC / Mac
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article
