Your DVR / NVR system menus are controlled using a USB wired mouse. If you plug in a USB mouse and it is not responding, it may be related to a malfunction in the mouse itself or a need to reconnect your mouse with your system.
LIMITATION: Wireless mice are not supported. Wireless mice require special drivers or software to be installed in order to function. Current DVR / NVR systems do not support the required drivers and software.
To troubleshoot your mouse not responding:
- Check that the laser on the bottom of the mouse is functioning, if there is no laser try installing another mouse.
- Test the mouse on a different device to confirm it is working.
- With the mouse plugged in, power cycle your DVR / NVR. To power cycle your recorder, please power off and disconnect the power source for approximately 30 seconds. Reconnect, and power on the recorder.
- Connect the mouse to another USB port on the DVR / NVR system.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article
