AWDGL-1 - No-drill Mount Kit for Video Doorbell B463AJD Series: Installation

Modified on Thu, Feb 20 at 6:15 AM

This article gives instructions on how to install your AWDGL - No-drill Mount Kit for Video Doorbell B463AJD Series.


Installing the No-Drill Mount Kit:

  1. Ensure the surface is smooth, clean, and dry.
  2. Peel off the protective film without touching the adhesive.

  1. Carefully attach the bracket to the surface.

  1. Mount the Video Doorbell on the bracket.


Removing the No-Drill Mount Kit:

  1. Insert the Release Pin into the top hole of the bracket. Gently push until the Video Doorbell is released.

  1. Gently wiggle the bracket side to side to avoid damage to the wall. Then clean the wall to remove any leftover adhesive residue.


For information on reinstalling your No-Drill Mount Kit, or for other questions, please visit the No-Drill Mount Kit FAQ page.


Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article

Search for more topics

Still have questions?

If you still have questions or couldn’t find what you’re looking for, our support team is here to help—feel free to reach out for further assistance.

Contact Us