This guide provides step-by-step instructions for connecting the mobile solar-powered security camera system's 4G modem to a Wi-Fi network, ensuring reliable remote connectivity for monitoring and control.
Prerequisites
- A computer (PC or laptop) with an Ethernet port
- An Ethernet cable
How to connect the 4G Modem to a Wi-Fi network
- Power on and Connect:
- Ensure the 4G modem/router is powered on.
- Connect the computer to the modem using an Ethernet cable plugged into either the ETH0 or ETH1 port.
- Access the Modem Interface:
- Open a web browser on the connected computer.
- Enter the default gateway IP address: 192.168.1.1
- When prompted, log in using the default credentials:
- Username: admin
- Password: admin
- Verify System Status:
- Upon initial login, navigate to the System Status menu
- Confirm that the Status is indicated as Offline
- Configure Wi-Fi Settings:
- From the main menu, go to Network > WLAN
- Choose to Create a new SSID or Edit an existing one
- Set Up Wi-Fi Client Mode:
- In the SSID configuration:
- Set Enabled to On
- Set Mode to Client (STA)
- From the SSID dropdown, select the desired Wi-Fi network
- Enter the corresponding Password for the selected Wi-Fi network
- Click OK to apply the settings
- In the SSID configuration:
- Finalize Configuration:
- The modem/router will reboot to apply the new settings
- After the reboot, log in again to the modem interface
- Navigate to the System Status menu and verify that the Internet Status now reads Online
Reference
This guide is adapted from the official manufacturer documentation provided by the manufacturer.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article